Recently Viewed Products
-
SA10/Rope - Sonde to Rope Adaptor
£3.90
-
BR6 - Heavy Duty Triple Corner Cable Roller
£103.00
-
Double Braid Winch Rope
Price range: £78.20 through £496.80
-
Duct Proving Mandrel - Elliptical
Price range: £94.90 through £215.80
-
Heavy Duty Roll On Cable Drum Rotator Pair - Ski Type - DR5
£375.00
-
Link Pin
Price range: £6.50 through £11.00
-
SA10/BT Rod - Sonde to BT Rod Adaptor
£18.75
-
SA10/12 - Sonde to Cobra Rod Adaptor
£9.75
-
Rubber Moulded Cable Drum/Wheel Chock - DC1
£15.00
-
QR4 Quadrant Roller
£91.80
Clamping Quadrant Roller – HR4
£61.50
The HR4 clamping roller can be clamped without tools to beams, trays or racks. Also by removing the clamp part it can be bolted directly down to unistrut or trays etc. Fitted with a hinged gate and knurled nut, cable can easily be extracted. The cable roller is suitable for cables up to 60mm diameter (aperture 80mm) with a weight capacity of 100Kg
- Heavy duty tubular construction
- Hinged gate for cable extraction
- 2 steel diablo rollers & 2 parallel rollers
- Sealed precision roller bearings fitted
- Zinc plated finish
- Size 27cm long x 17cm wide x 5cm depth (including clamp)
- Weight 2.5Kg
| Weight | 2.5 kg |
|---|
Related products
-
Heavy Duty 130mm Cable Roller Fitted With Plastic Diablo – SLR9P
£29.50Add to cartThe SLR9P is a heavy duty straight line cable roller for use in most cable laying applications and specifically where the ground is unstable. The base can be drilled as an option for fixing down. The diablo roller is nylon so non-conductive and reduces the risk of damage to the cable. • Heavy duty tubular …
Heavy Duty 130mm Cable Roller Fitted With Plastic Diablo – SLR9PRead More
-
Heavy Duty Hanging Roller – HR3
£78.80Add to cartThe HR3 hanging roller enables cable to be suspended and winched into position prior to fixing on to tray or cable racking. Similar to the HR1 but fitted with a solid steel roller and heavy duty hook, normally used on heavy cable applications or on the initial roller when lifted from floor to cable rack. …
-
Light Duty Roll On Cable Drum Rotator Pair – Ski Type – DR4
£197.60Add to cartThe DR4 light duty roll on cable drum rotator is suitable for a range of drum diameters up to 1200mm. Drums are simply rolled up the ramp onto the adjustable rollers to allow it to spin freely Pressed/rolled steel construction 76mm diameter heavy duty zinc plated rollers Precision sealed roller bearings fitted Capacity 1000Kg Min …
Light Duty Roll On Cable Drum Rotator Pair – Ski Type – DR4Read More
-
Straight Line Bridge Type Cable Roller – SLR5
£26.00Add to cartHeavy duty 130mm straight line bridge roller for use in most cable laying applications • Heavy duty tubular frame straight line bridge roller • Fitted with hoops to fit over previously laid cables • 110mm diameter large waisted steel roller • Sealed roller bearing fitted • Bright zinc plated finish • 130mm diameter cable capacity …
Reviews
There are no reviews yet.