Techlube HD
Price range: £57.20 through £1,320.00
Techlube HD is a heavy duty water-based cable pulling lubricant for underground cable installations. It was specially designed for heavy cables and difficult cable pulls. Provides superior friction reduction between cable and all forms of conduit, including multiple concrete duct. String & cling consistency adheres perfectly to cables in wet weather and has a resistance to wash off in water filled ducts. Techlube HD is a non-flammable, non-toxic and biodegradable cable lubricant suitable for use with electrical and power cables
Applications for Techlube HD Cable Pulling Lubricant
•Underground power and telecom cable placement lubricant
•High shear, difficult cable pulling installations
•Sub-duct installations
•Duct pre-lubrication
Key Benefits of Techlube HD Cable Pulling Lubricant
•Easy to apply water-based, high performance polymer cable lubricant
•Strong adhesion to cable/duct provides superior friction reduction
•Reduced risk of cable damage during the cable pull
•Regular pulling tension during cable installation
•Dries slowly to form a thin friction reducing film which retains its slip
•Retains duct lubrication, allowing additional cable installs/removals in same duct
•Continues to lubricate the cable jacket even when ducts are flooded
•High and low temperature stability
•Compatibility tested with materials used in power cable joints and accessories
•Proven compatible with all forms of cable jacket materials when tested according to the IEEE Guide P1210/D10
•Does not contain salt, detergent or grease which can degrade cable jackets
•Will not cause hot spots
•No threat to environment, spillages can be flushed to drain
Standard Packaging for Techlube Multi Cable Pulling LubricantÂ
•20 litre bucket (each)
Key Approvals & Recommendations for Techlube Cable Pulling Lubricants
•Bellcore Requirements for Cable Placing Lubricants
•Bellcore Technical Audit Report AU-NWT-000077
•Recommended by Nexans after compatibility testing with Nexan Cable Jacket Material
•RTE Réseau de Transport d’Électricité
| Weight | N/A |
|---|---|
| Quantity | 1x 20ltr pail, 24x 20ltr pail |
Related products
-
Medium Duty Roll On Cable Drum Rotator Pair – Ski Type – DR3
£262.50Add to basketThe DR3 medium duty roll on cable drum rotator is suitable for a range of drum diameters up to 2200mm. Drums are simply rolled up the ramp onto the adjustable rollers to allow it to spin freely Pressed/rolled steel construction 76mm diameter heavy duty zinc plated rollers Precision sealed roller bearings fitted Capacity 1500Kg Min …
Medium Duty Roll On Cable Drum Rotator Pair – Ski Type – DR3Read More
-
Heavy Duty 130mm Cable Roller Fitted With Plastic Diablo – SLR9P
£29.50Add to basketThe SLR9P is a heavy duty straight line cable roller for use in most cable laying applications and specifically where the ground is unstable. The base can be drilled as an option for fixing down. The diablo roller is nylon so non-conductive and reduces the risk of damage to the cable. • Heavy duty tubular …
Heavy Duty 130mm Cable Roller Fitted With Plastic Diablo – SLR9PRead More
-
Heavy Duty 214mm All Plastic Bridge Cable Roller – SLR14P
£29.50Add to basketThe SLR14P is a heavy duty all plastic cable roller for use in most cable laying applications. The design makes the roller light in weight whilst maintaining the strength of a conventional cable roller. There is also an added benefit of being able to link together to form a chain for those difficult situations or …
Heavy Duty 214mm All Plastic Bridge Cable Roller – SLR14PRead More
-
Unistrut Roller – HR5
£20.50Add to basketThe HR5 unistrut roller can be bolted directly down onto 41mm unistrut (as illustrated), flat plate or square box section up to 40mm. The roller can be made to any width but as standard comes with a 240mm wide roller (340mm overall) All steel construction with tapered edges for smooth guiding Slotted holes for flexible …
Reviews
There are no reviews yet.