Techlube HD
£55.80
Techlube HD is a heavy duty water-based cable pulling lubricant for underground cable installations. It was specially designed for heavy cables and difficult cable pulls. Provides superior friction reduction between cable and all forms of conduit, including multiple concrete duct. String & cling consistency adheres perfectly to cables in wet weather and has a resistance to wash off in water filled ducts. Techlube HD is a non-flammable, non-toxic and biodegradable cable lubricant suitable for use with electrical and power cables
Applications for Techlube HD Cable Pulling Lubricant
•Underground power and telecom cable placement lubricant
•High shear, difficult cable pulling installations
•Sub-duct installations
•Duct pre-lubrication
Key Benefits of Techlube HD Cable Pulling Lubricant
•Easy to apply water-based, high performance polymer cable lubricant
•Strong adhesion to cable/duct provides superior friction reduction
•Reduced risk of cable damage during the cable pull
•Regular pulling tension during cable installation
•Dries slowly to form a thin friction reducing film which retains its slip
•Retains duct lubrication, allowing additional cable installs/removals in same duct
•Continues to lubricate the cable jacket even when ducts are flooded
•High and low temperature stability
•Compatibility tested with materials used in power cable joints and accessories
•Proven compatible with all forms of cable jacket materials when tested according to the IEEE Guide P1210/D10
•Does not contain salt, detergent or grease which can degrade cable jackets
•Will not cause hot spots
•No threat to environment, spillages can be flushed to drain
Standard Packaging for Techlube Multi Cable Pulling LubricantÂ
•20 litre bucket (each)
Key Approvals & Recommendations for Techlube Cable Pulling Lubricants
•Bellcore Requirements for Cable Placing Lubricants
•Bellcore Technical Audit Report AU-NWT-000077
•Recommended by Nexans after compatibility testing with Nexan Cable Jacket Material
•RTE Réseau de Transport d’Électricité
| Weight | 21.0 kg |
|---|
Related products
-
Straight Line Bridge Type Cable Roller – SLR5
£26.00Add to cartHeavy duty 130mm straight line bridge roller for use in most cable laying applications • Heavy duty tubular frame straight line bridge roller • Fitted with hoops to fit over previously laid cables • 110mm diameter large waisted steel roller • Sealed roller bearing fitted • Bright zinc plated finish • 130mm diameter cable capacity …
-
Articulated Swivel Link
£60.00 – £67.00Select options This product has multiple variants. The options may be chosen on the product pageArticulated swivel links assist around bends and when passing through running out/snatch blocks Code SWL Dia. Length Jaw Width Pin Dia. SW3TA HD 3,000Kg 32mm 130mm 13.5mm 12mm SW6TA HD 6,000Kg 48mm 185mm 16.5mm 16mm
-
Heavy Duty 214mm Cable Roller Fitted With Plastic Diablo – SLR13P
£42.00Add to cartThe SLR13P is a very heavy duty cable roller for use in most cable laying applications. The diablo roller is nylon to reduce weight and is non-conductive, reducing the risk of damage to the cable • Heavy duty 5mm steel frame straight line roller • 140mm diameter (114mm radius) nylon roller • Sealed roller bearing …
Heavy Duty 214mm Cable Roller Fitted With Plastic Diablo – SLR13PRead More
-
Heavy Duty 205mm Bridge Cable Roller Fitted With Plastic Diablo – SLR10P
£42.50Add to cartThe SLR10P is a heavy duty bridge style cable roller for use in most cable laying applications. The diablo roller is nylon so non-conductive and reduces the risk of damage to the cable. • Heavy duty tubular frame straight line bridge roller • Fitted with hoops to fit over previously laid cables • 110mm diameter …
Heavy Duty 205mm Bridge Cable Roller Fitted With Plastic Diablo – SLR10PRead More
Reviews
There are no reviews yet.