Techlube PHD
Price range: £46.20 through £1,056.00
Techlube PHD pourable cable lubricant is an underground cable installation lubricant for medium weight and lighter cable pulling operations. Its string & cling consistency adheres perfectly to cables in wet weather and has a resistance to wash off in water filled ducts. Techlube PHD is a non-flammable, non-toxic and biodegradable water-based cable lubricant suitable for use with electrical and telecommunication cables.
Applications for Techlube PHD Cable Pulling Lubricant
•Underground electrical utility and telecommunications cable placing operations
•Medium weight and lighter cable pulls
•Sub-duct installations
•Duct pre-lubrication
Key Benefits of Techlube PHD Cable Pulling Lubricant
•Easy to apply water-based, high performance cable lubricant
•Superior friction reduction and strong adhesion to cable/duct wall
•Regular pulling tension and reduced risk of cable damage during the cable installation
•Dries slowly to form a thin friction reducing film which retains its slip
•Allows additional cable installs or removals in same duct at a later date
•Continues to lubricate the cable jacket in flooded conditions
•High and low temperature stability
•Compatibility tested with materials used in cable jackets, cable joints and accessories
•Does not contain salt, detergent or grease which can degrade cable jackets and cause hot spots
•No threat to environment, spillages can be flushed to drain
Standard Packaging for Techlube PHD Cable Pulling Lubricant
•20 litre bucket (each)
Key Approvals & Recommendations for Techlube Cable Pulling Lubricants
•Bellcore Requirements for Cable Placing Lubricants
•Bellcore Technical Audit Report AU-NWT-000077
•Recommended by Nexans after compatibility testing with Nexan Cable Jacket Material
| Weight | 21.0 kg |
|---|---|
| Quantity | 1x 20ltr pail, 24x 20ltr pail |
Related products
-
Compact Hanging Roller – HR2
£59.10Add to basketThe HR2 hanging roller enables cable to be suspended and winched into position prior to fixing on to tray or cable racking. Fitted with a handy safety hook, the HR2 is quick and easy to install without the need for tools or shackles and is fitted with an aluminium deep diablo roller for effective cable …
-
Heavy Duty 214mm Cable Roller Fitted With Plastic Diablo – SLR13P
£42.00Add to basketThe SLR13P is a very heavy duty cable roller for use in most cable laying applications. The diablo roller is nylon to reduce weight and is non-conductive, reducing the risk of damage to the cable • Heavy duty 5mm steel frame straight line roller • 140mm diameter (114mm radius) nylon roller • Sealed roller bearing …
Heavy Duty 214mm Cable Roller Fitted With Plastic Diablo – SLR13PRead More
-
QR1 Quadrant Roller Heavy Duty
£122.90Add to basketThe QR1 heavy duty quadrant roller can be bolted to floors, beams, trays, racks or fitted to a free-standing frame. Fitted with a hinged/removable gate, cable can easily be extracted. The cable roller is suitable for cables up to 160mm diameter (aperture 170mm) with a weight capacity of 400Kg Heavy duty steel construction 4off 6mm …
-
Heavy Duty Hanging Roller – HR3
£78.80Add to basketThe HR3 hanging roller enables cable to be suspended and winched into position prior to fixing on to tray or cable racking. Similar to the HR1 but fitted with a solid steel roller and heavy duty hook, normally used on heavy cable applications or on the initial roller when lifted from floor to cable rack. …
Reviews
There are no reviews yet.