Techlube PHD
Price range: £46.20 through £1,056.00
Techlube PHD pourable cable lubricant is an underground cable installation lubricant for medium weight and lighter cable pulling operations. Its string & cling consistency adheres perfectly to cables in wet weather and has a resistance to wash off in water filled ducts. Techlube PHD is a non-flammable, non-toxic and biodegradable water-based cable lubricant suitable for use with electrical and telecommunication cables.
Applications for Techlube PHD Cable Pulling Lubricant
•Underground electrical utility and telecommunications cable placing operations
•Medium weight and lighter cable pulls
•Sub-duct installations
•Duct pre-lubrication
Key Benefits of Techlube PHD Cable Pulling Lubricant
•Easy to apply water-based, high performance cable lubricant
•Superior friction reduction and strong adhesion to cable/duct wall
•Regular pulling tension and reduced risk of cable damage during the cable installation
•Dries slowly to form a thin friction reducing film which retains its slip
•Allows additional cable installs or removals in same duct at a later date
•Continues to lubricate the cable jacket in flooded conditions
•High and low temperature stability
•Compatibility tested with materials used in cable jackets, cable joints and accessories
•Does not contain salt, detergent or grease which can degrade cable jackets and cause hot spots
•No threat to environment, spillages can be flushed to drain
Standard Packaging for Techlube PHD Cable Pulling Lubricant
•20 litre bucket (each)
Key Approvals & Recommendations for Techlube Cable Pulling Lubricants
•Bellcore Requirements for Cable Placing Lubricants
•Bellcore Technical Audit Report AU-NWT-000077
•Recommended by Nexans after compatibility testing with Nexan Cable Jacket Material
| Weight | 21.0 kg |
|---|---|
| Quantity | 1x 20ltr pail, 24x 20ltr pail |
Related products
-
Light Duty Roll On Cable Drum Rotator Pair – Ski Type – DR4
£197.60Add to cartThe DR4 light duty roll on cable drum rotator is suitable for a range of drum diameters up to 1200mm. Drums are simply rolled up the ramp onto the adjustable rollers to allow it to spin freely Pressed/rolled steel construction 76mm diameter heavy duty zinc plated rollers Precision sealed roller bearings fitted Capacity 1000Kg Min …
Light Duty Roll On Cable Drum Rotator Pair – Ski Type – DR4Read More
-
Straight Line Bridge Type Cable Roller – SLR5
£26.00Add to cartHeavy duty 130mm straight line bridge roller for use in most cable laying applications • Heavy duty tubular frame straight line bridge roller • Fitted with hoops to fit over previously laid cables • 110mm diameter large waisted steel roller • Sealed roller bearing fitted • Bright zinc plated finish • 130mm diameter cable capacity …
-
Medium Duty Roll On Cable Drum Rotator Pair – Ski Type – DR3
£262.50Add to cartThe DR3 medium duty roll on cable drum rotator is suitable for a range of drum diameters up to 2200mm. Drums are simply rolled up the ramp onto the adjustable rollers to allow it to spin freely Pressed/rolled steel construction 76mm diameter heavy duty zinc plated rollers Precision sealed roller bearings fitted Capacity 1500Kg Min …
Medium Duty Roll On Cable Drum Rotator Pair – Ski Type – DR3Read More
-
Unistrut Roller – HR5
£20.50Add to cartThe HR5 unistrut roller can be bolted directly down onto 41mm unistrut (as illustrated), flat plate or square box section up to 40mm. The roller can be made to any width but as standard comes with a 240mm wide roller (340mm overall) All steel construction with tapered edges for smooth guiding Slotted holes for flexible …
Reviews
There are no reviews yet.