Techlube Multi
Price range: £49.50 through £1,135.20
Techlube Multi cable lubricant is an all-purpose water-based underground cable installation lubricant for general cable pulling operations. Its string & cling consistency adheres perfectly to cables in wet weather and has a resistance to wash off in water filled ducts. Techlube Multi is a non-flammable, non-toxic and biodegradable cable lubricant
Applications for Techlube Multi Cable Pulling Lubricant
•Underground utility cable placement operations
•Sub-duct installations
•Duct pre-lubrication
Key Benefits of Techlube Multi Cable Pulling Lubricant
•Easy to apply water-based, high performance cable lubricant
•Intermediate viscosity suitable for use with electrical and telecommunication cables
•Superior friction reduction and strong adhesion to cable/duct wall
•Regular pulling tension
•Reduced risk of cable damage during the cable installation
•Dries slowly to form a thin friction reducing film which retains its slip
•Allows additional cable installs or removals in same duct at a later date
•Continues to lubricate the cable jacket in flooded conditions
•High and low temperature stability
•Compatibility tested with materials used in cable jackets, cable joints and accessories
•Does not contain salt, detergent or grease which can degrade cable jackets
•Does not cause hot spots
•No threat to environment, spillages can be flushed to drain
Standard Packaging for Techlube Multi Cable Pulling LubricantÂ
•20 litre bucket (each)
Key Approvals & Recommendations for Techlube Cable Pulling Lubricants
•Bellcore Requirements for Cable Placing Lubricants
•Bellcore Technical Audit Report AU-NWT-000077
•Recommended by Nexans after compatibility testing with Nexan Cable Jacket Material
| Weight | 21.0 kg |
|---|---|
| Quantity | 1x 20ltr pail, 24x 20ltr pail |
Related products
-
Clamping Quadrant Roller – HR4
£61.50Add to basketThe HR4 clamping roller can be clamped without tools to beams, trays or racks. Also by removing the clamp part it can be bolted directly down to unistrut or trays etc. Fitted with a hinged gate and knurled nut, cable can easily be extracted. The cable roller is suitable for cables up to 60mm diameter …
-
Heavy Duty Hanging Roller – HR3
£78.80Add to basketThe HR3 hanging roller enables cable to be suspended and winched into position prior to fixing on to tray or cable racking. Similar to the HR1 but fitted with a solid steel roller and heavy duty hook, normally used on heavy cable applications or on the initial roller when lifted from floor to cable rack. …
-
Medium Duty Roll On Cable Drum Rotator Pair – Ski Type – DR3
£262.50Add to basketThe DR3 medium duty roll on cable drum rotator is suitable for a range of drum diameters up to 2200mm. Drums are simply rolled up the ramp onto the adjustable rollers to allow it to spin freely Pressed/rolled steel construction 76mm diameter heavy duty zinc plated rollers Precision sealed roller bearings fitted Capacity 1500Kg Min …
Medium Duty Roll On Cable Drum Rotator Pair – Ski Type – DR3Read More
-
Heavy Duty 214mm All Plastic Bridge Cable Roller – SLR14P
£29.50Add to basketThe SLR14P is a heavy duty all plastic cable roller for use in most cable laying applications. The design makes the roller light in weight whilst maintaining the strength of a conventional cable roller. There is also an added benefit of being able to link together to form a chain for those difficult situations or …
Heavy Duty 214mm All Plastic Bridge Cable Roller – SLR14PRead More
Reviews
There are no reviews yet.