Techlube HD
Price range: £57.20 through £1,320.00
Techlube HD is a heavy duty water-based cable pulling lubricant for underground cable installations. It was specially designed for heavy cables and difficult cable pulls. Provides superior friction reduction between cable and all forms of conduit, including multiple concrete duct. String & cling consistency adheres perfectly to cables in wet weather and has a resistance to wash off in water filled ducts. Techlube HD is a non-flammable, non-toxic and biodegradable cable lubricant suitable for use with electrical and power cables
Applications for Techlube HD Cable Pulling Lubricant
•Underground power and telecom cable placement lubricant
•High shear, difficult cable pulling installations
•Sub-duct installations
•Duct pre-lubrication
Key Benefits of Techlube HD Cable Pulling Lubricant
•Easy to apply water-based, high performance polymer cable lubricant
•Strong adhesion to cable/duct provides superior friction reduction
•Reduced risk of cable damage during the cable pull
•Regular pulling tension during cable installation
•Dries slowly to form a thin friction reducing film which retains its slip
•Retains duct lubrication, allowing additional cable installs/removals in same duct
•Continues to lubricate the cable jacket even when ducts are flooded
•High and low temperature stability
•Compatibility tested with materials used in power cable joints and accessories
•Proven compatible with all forms of cable jacket materials when tested according to the IEEE Guide P1210/D10
•Does not contain salt, detergent or grease which can degrade cable jackets
•Will not cause hot spots
•No threat to environment, spillages can be flushed to drain
Standard Packaging for Techlube Multi Cable Pulling Lubricant
•20 litre bucket (each)
Key Approvals & Recommendations for Techlube Cable Pulling Lubricants
•Bellcore Requirements for Cable Placing Lubricants
•Bellcore Technical Audit Report AU-NWT-000077
•Recommended by Nexans after compatibility testing with Nexan Cable Jacket Material
•RTE Réseau de Transport d’Électricité
| Weight | N/A |
|---|---|
| Quantity | 1x 20ltr pail, 24x 20ltr pail |
Related products
-
Light Duty Roll On Cable Drum Rotator Pair – Ski Type – DR4
£197.60Add to cartThe DR4 light duty roll on cable drum rotator is suitable for a range of drum diameters up to 1200mm. Drums are simply rolled up the ramp onto the adjustable rollers to allow it to spin freely Pressed/rolled steel construction 76mm diameter heavy duty zinc plated rollers Precision sealed roller bearings fitted Capacity 1000Kg Min …
Light Duty Roll On Cable Drum Rotator Pair – Ski Type – DR4Read More
-
BR6 – Heavy Duty Triple Corner Cable Roller
£103.00Add to cartThe BR6 is a heavy duty triple corner cable roller for use in most cable laying applications and for cables up to 210mm. These can be used singularly or linked together using LP1 link pins to form a full bend. All of the bend roller range have the same link points to facilitate various bend/roller …
-
Economical 130mm Pressed Steel Pipe/Cable Roller – SLR6
£20.00Add to cartThe SLR6 is an economical yet versatile pipe/cable roller for use in trenches, on cable tray or bolted down as a materials roller Medium duty pressed straight line roller Can be used as a pipe roller or cable roller Supplied with 4x 12mm holes in base for securing to a cable tray etc. 110mm diameter …
Economical 130mm Pressed Steel Pipe/Cable Roller – SLR6Read More
-
Articulated Swivel Link
Price range: £60.00 through £67.00Select options This product has multiple variants. The options may be chosen on the product pageArticulated swivel links assist around bends and when passing through running out/snatch blocks Code SWL Dia. Length Jaw Width Pin Dia. SW3TA HD 3,000Kg 32mm 130mm 13.5mm 12mm SW6TA HD 6,000Kg 48mm 185mm 16.5mm 16mm
Reviews
There are no reviews yet.